M2 respirator satchel : French Army Accession Number: REL31834.001

Description

Satchel for the French Army M-2 Respirator. The semicircular satchel is made from a double thickness of pale khaki cotton fabric, the inner surfaces of which are coated with brown rubber waterproofing. A large fold-over flap is secured at the front by a single alloy button, and there is a 570 mm shoulder strap sewn to the rear corners. The words 'TAILLE ORDINAIRE' (Size Ordinary, or Normal) are stamped in brown on the front of the satchel. Inside is a small square pocket on the right hand rear to hold replacement eyepieces (see REL31834.003)

Contextual Description

The M-2 Mask was introduced into French Army service in March 1916, as a replacement for the enormous variety of inefficient 'pad' and helmet respirators which had been rushed into production following the first German use of poison gas in April 1915. These included the C-1, C-2, C-3, TNH and LTN, as well as the 'Detourbe', 'Piedalu' and 'Robert' masks. The M-2 consisted of a number of layers of muslin impregnated with absorbent chemicals, which wrapped around the face, and were protected from the elements by a weather-proof flap of oiled fabric. Typical makeup of the absorbent solutions was up to twenty layers of fabric impregnated with castor oil, alcohol, glycerine and sodium hydroxide (this compound known as 'Greasene') and a further twenty layers of 'Complexene', which was composed of hexamine, glycerine, nickel sulfate, sodium carbonate and water. Since there was no outlet valve, all air breathed had to pass both in and out through the impregnated fabric of the hot and stifling mask. This required considerable effort on the part of the wearer, and restricted physical exertion to a minimum. Despite these drawbacks, the M-2 was fairly comfortable to wear for extended periods, and could be expected to provide over an hour's protection from high concentrations of gas. It was the standard French infantryman's respirator for the bulk of the war, and was not replaced in service until the later part of 1918, when the ARS ('Appareil Respiratoire Special') mask, which was based upon the contemporary German 'lederschutzmaske', was introduced. Early M-2 masks featured a single rectangular cellulose or cellophane window over the eyes, but as this was subject to damage and impossible to remove or repair, it was replaced from April 1916 by a system of individual eyepieces. These celluloid eyepieces, which were treated with an anti-dimming solution, were easily removed and replaced if damaged. A spare set was carried in a pocket within the mask's waterproof storage satchel.

Details

Accession Number
REL31834.001
Maker
Unknown
Classification
Heraldry
Object Type
Personal Equipment
Physical Description
Material: Alloy
Material: Rubberised fabric
Measurement
Overall: 190 mm Height x 275 mm Width x 18 mm Depth (Strap not included)
Date Made
c 1915-1918
Place Made
Whole/Part
Whole
Item Count
1
Copyright
Copyright not applicable

Conflicts

Places

Units

Tags

Accession REL31834.001

More like this

Replacement eyepiece for M2 respirator : French Army

Heraldry REL31834.003 First World War, 1914-1918

Spare eyepiece for the French Army M-2 Respirator. The circular aluminium outer frame of the eyepiece has an inner surface with scalloped edges, while the outer has a cardboard ring to hold the window

M2 respirator : French Army

Heraldry REL31834.002 First World War, 1914-1918

French Army M-2 Respirator. The full-face mask, which also encloses the wearer's chin, is made from many layers of impregnated muslin, with a weatherproof outer flap made of two layers of oiled cloth.

Satchel for Black Veil respirator : British Army

Heraldry REL31825.001 First World War, 1914-1918

Satchel to hold the British Army 'Black Veil' respirator. The satchel is made from rubberised khaki cotton drill fabric, and has an overlapping front flap with a pair of cotton tape ties. The ties are

Black Veil respirator : British Army

Heraldry REL31825.002 First World War, 1914-1918

British Army 'Black Veil' respirator. The mask is made from a 1 metre length of 280 mm wide black veiling. The veiling is folded to form a 100 mm wide sleeve, the centre of which is sewn to form a 200

Small box respirator without canister : British Army

Heraldry REL32651 First World War, 1914-1918

British Small Box Respirator consisting of a rubberised fabric face mask, connected by a fabric covered rubber hose to the top section of a chemical absorbent canister. The remainder of the tin plate

PH Helmet respirator : British Army

Heraldry RELAWM04043.001 First World War, 1914-1918

'PH' or 'Tube' helmet respirator as issued to British Army troops from January 1916. The helmet is a simple bag made from a double thickness of unlined blue-grey woollen flannelette fabric with a side

See more similar items →

Record information

Last modified: 25 October 2023 - 2.40 am