HMAS Brisbane : Gun Plot Room : Air Duct inspection cover and adjacent tally plate and bracket. Accession Number: REL32980.021

Description

The air duct inspection cover is a disc shaped assembly, fabricated from sheet alloy, with stamped sections welded as required and a central steel attachment point. The associated bracket/latch is a stainless steel folded U channel with a stainless steel clip. The plaque is etched alloy sheet and reads RECIRC SYSTEM 2-100-2. It is secured by two screws. The tally (I.D) plate is rectangular, made of metal and reads `RECIRC SYSTEM 1-200-2'. The bracket is rectangular, made of alloy metal and has an additional, flat piece of metal attached approximately half way along the top of the bracket. (Unsure of its intended use.)

Contextual Description

This component was removed from HMAS Brisbane after the ship was de-commissioned in 2001. The Air Duct Cover and fittings are installed on the ceiling of the Gun Plot Room. They are part of the system for circulating air through the ship. HMAS Brisbane [II] was commissioned into the Royal Australian Navy in December 1967 and was the second vessel of that name to serve in the RAN. Known officially as DDG-41, Brisbane was the third of the RAN's American-built "Charles F. Adams" class guided-missiles destroyers. This class were the first major Australian warships designed and built in America, and were constructed by the Defoe Shipbuilding Co. The original complement of the Brisbane was 20 officers and over 300 sailors. Main armament was two 5-inch/54 calibre guns and anti-submarine torpedoes. The Ikara missile system was subsequently added. In later service the ship was known by the nick-name ‘the Steel Cat’. The HMAS Brisbane saw operational service in two conflicts. During the Vietnam War the ship undertook two tours of duty with the United States Seventh Fleet, in 1969 and again in 1971. The ship’s major task was to provide gunfire support for the land campaign. During the Gulf War (1990-91), Brisbane was one of four Australian warships to serve a tour in Gulf waters. The Brisbane arrived in the Gulf in December 1990 and operated there until March 1991, performing a number of roles. Apart from contributing to the anti-aircraft defences in the carrier screen, the ship also kept watch for mines and ensured that small civilian craft kept well away from the carrier group. Later, during Operation Desert Storm, the Brisbane controlled fighter combat air patrols and tanker aircraft. The ship’s final role was as an escort for US replenishment ships. In 2003 HMAS Brisbane was retired from service in the Royal Australian Navy. The Brisbane was the last steam powered ship in the RAN. HMAS Brisbane was sunk as a recreational dive wreck off the coast of southern Queensland in July 2005.

Details

Accession Number
REL32980.021
Maker
Unknown
Classification
Technology
Object Type
Maritime vessel or watercraft
Measurement
Archived measurement
Date Made
Unknown
Place Made
Whole/Part
Whole
Item Count
1
Copyright
Copyright not applicable

Conflicts

Units

Tags

Accession REL32980.021

More like this

HMAS Brisbane : Gun Plot Room : Bracket

Technology REL32980.102 Gulf War, 1990-1991

The bracket is attached to the wall of the GPR, adjacent to the hull of the ship (opposite door). It consists of two rectangular steel plates welded at the rear to a Z shaped U section channel frame.

HMAS Brisbane : Gun Plot Room : T' bracket

Technology REL32980.064 Gulf War, 1990-1991

The bracket consists of two sections of alloy L channel, welded into a T shape and painted white on the external surfaces. The short arm of the T has two bolt holes, while the long arm has one. This

HMAS Brisbane : Gun Plot Room : Mounting Bracket

Technology REL32980.050 Gulf War, 1990-1991

Mounting bracket for equipment cabinet in GPR. The bracket is `L' shaped and is attached via two large bolts to a dual shock mount, consisting of two Barrymounts attached to a rectangular plate by eig

HMAS Brisbane : Gun Plot Room : Mounting Bracket

Technology REL32980.051 Gulf War, 1990-1991

Mounting bracket for equipment cabinet in GPR. The bracket is `L' shaped and is attached via two large bolts to a dual shock mount, consisting of two Barrymounts attached to a rectangular plate by eig

HMAS Brisbane : Gun Plot Room : Cover

Technology REL32980.093 Gulf War, 1990-1991

The cover is rectangular, made from a folded sheet of alloy, painted grey. It consists of a top and two sides. Each side has four holes for bolting them to the correct piece of equipment. On the top o

HMAS Brisbane : Gun Plot Room : Aluminium cover

Technology REL32980.096 Gulf War, 1990-1991

The cover is a rectangular alloy sheet with two folded edges located on one long side and one short side. On the opposite long side the edge is pierced by three holes, a length of rope with taped ends

See more similar items →

Record information

Last modified: 1 May 2023 - 2.28 am