HMAS Brisbane : Gun Plot Room : Cover panel Accession Number: REL32980.103

Description

The cover panel is a large grey sheet of flat metal. One side of the panel has a slightly curved lip. There are several drill holes around the edges of the panel and several in the middle in no particular order. The panel has a large, white horizontal stripe painted about 2.5 inches from the base. The stripe is 605mm thick.

Contextual Description

This component was removed from HMAS Brisbane after the ship was de-commissioned in 2001. The Cover Panel is fitted in the Gun Plot Room. HMAS Brisbane [II] was commissioned into the Royal Australian Navy in December 1967 and was the second vessel of that name to serve in the RAN. Known officially as DDG-41, Brisbane was the third of the RAN's American-built "Charles F. Adams" class guided-missiles destroyers. This class were the first major Australian warships designed and built in America, and were constructed by the Defoe Shipbuilding Co. The original complement of the Brisbane was 20 officers and over 300 sailors. Main armament was two 5-inch/54 calibre guns and anti-submarine torpedoes. The Ikara missile system was subsequently added. In later service the ship was known by the nick-name ‘the Steel Cat’. The HMAS Brisbane saw operational service in two conflicts. During the Vietnam War the ship undertook two tours of duty with the United States Seventh Fleet, in 1969 and again in 1971. The ship’s major task was to provide gunfire support for the land campaign. During the Gulf War (1990-91), Brisbane was one of four Australian warships to serve a tour in Gulf waters. The Brisbane arrived in the Gulf in December 1990 and operated there until March 1991, performing a number of roles. Apart from contributing to the anti-aircraft defences in the carrier screen, the ship also kept watch for mines and ensured that small civilian craft kept well away from the carrier group. Later, during Operation Desert Storm, the Brisbane controlled fighter combat air patrols and tanker aircraft. The ship’s final role was as an escort for US replenishment ships. In 2003 HMAS Brisbane was retired from service in the Royal Australian Navy. The Brisbane was the last steam powered ship in the RAN. HMAS Brisbane was sunk as a recreational dive wreck off the coast of southern Queensland in July 2005.

Details

Accession Number
REL32980.103
Maker
Unknown
Classification
Technology
Object Type
Maritime vessel or watercraft
Measurement
Archived measurement
Date Made
Unknown
Place Made
Whole/Part
Whole
Item Count
1
Copyright
Copyright not applicable

Conflicts

More like this

HMAS Brisbane : Gun Plot Room : Cover panel

Technology REL32980.087 Gulf War, 1990-1991

The cover panel is a large grey sheet of flat metal. One side of the panel has a slightly curved lip. There are several drill holes around the edges of the panel and several in the middle in various l

HMAS Brisbane : Gun Plot Room : Cover

Technology REL32980.093 Gulf War, 1990-1991

The cover is rectangular, made from a folded sheet of alloy, painted grey. It consists of a top and two sides. Each side has four holes for bolting them to the correct piece of equipment. On the top o

HMAS Brisbane : Gun Plot Room : Aluminium cover

Technology REL32980.096 Gulf War, 1990-1991

The cover is a rectangular alloy sheet with two folded edges located on one long side and one short side. On the opposite long side the edge is pierced by three holes, a length of rope with taped ends

HMAS Brisbane : Gun Plot Room : Aluminium cover

Technology REL32980.095 Gulf War, 1990-1991

The cover is a rectangular alloy sheet with two folded edges, located on one long side and one short side. On the opposite long side the edge is pierced by three holes, a length of rope with taped end

HMAS Brisbane : Gun Plot Room : Tarpaulin

Technology REL32980.109 Gulf War, 1990-1991

Green acrylic patterned fabric tarpaulin, with reinforced edge and brass eyelets. Spacing between eyelets is 250mm. This component was removed from HMAS Brisbane after the ship was de-commissioned i

HMAS Brisbane : Gun Plot Room : Fluorescent light

Technology REL32980.133 Gulf War, 1990-1991

Rectangular metal casing containing fluorescent lights, protected by a moulded white plastic cover. There are four oval brackets attached to the back of the light. This component was removed from HM

See more similar items →

Record information

Last modified: 1 May 2023 - 2.37 am