The Australian War Memorial Collection. Test site
Section of propeller blade from the Fokker Dr 1 aircraft flown by the German ace Baron von Richthofen. 7 1/2" x 3 1/2" x 5/8" thick. Commonwealth Scientific Industrial and Research Organisation examination in 1995 found that this piece is made of laminations of mahogany and birch.
Another fragment in the Memorial's collection, REL/03146.001, retains a portion of the maker's decal, showing the propeller to have been made by Axial.
Control column from a Fokker Dr I aircraft, serial No 425/17. The head of the control column has been twisted / distorted to the right about forty-five degrees and slightly upward. It has at least two
Flier's knee high left overboot, custom-made from narrow sections of pelts, possibly deer, with the fur side being outermost. The pelts have been sewn together vertically with linen thread using the '
A length of wing strut removed from Rittmeister Manfred Albrecht Freiherr von Richthofen's Fokker Dr1 triplane soon after he was shot down on 21 April 1918. The strut, of distinct aerofoil shape, has
Small portion of aircraft propeller 3" x 1 1/2" x 1/2" labelled: "Part of the propeller of the Red Falcon of the 11th "Jagdstaffel" flown by Richthofen. Brought down near Corbie.” Commonwealth Scienti
Portion of the propeller from the aeroplane flown by Captain Manfred von Richthofen, who was brought down at 11-15am on 21 April 1918 near Corbie. CSIRO examination in 1995 shows this piece to be made
Portion of one of the mahogany laminations from the propeller from the aeroplane flown by Captain Manfred von Richthofen, who was brought down at 11-15am on 21 April 1918 near Corbie. The fragment is
Fragment of timber from Baron Manfred von Richthofen's Fokker Dr 1 propeller. The facing surface shows traces of an AXIAL propeller-maker's decal. This fragment is comprised of birch, but retains a
An approximately rectangular section of fabric, finished with two layers; a light blue/grey layer underneath and a red layer on top. The fabric is marked on the reverse with a circular ink stamp 47mm
Consists of two pieces of fabric. The first has a finished surface of two layers,. The base layer is a partially transparent layer of varnish with a light brown colouration while the top layer is a si
