L1A1 Self Loading Rifle Accession Number: REL35170

Description

The L1A1 is a gas operated, semi-automatic only, magazine fed rifle. It functions using a short stroke gas piston located above the barrel. After the shot is fired, the gas piston makes a quick tap to the bolt carrier and then returns back to battery and the rest of the reloading cycle is commenced by the inertia of the bolt group. The gas system is has an adjustable gas regulator. The locking system uses a bolt carrier with a separate bolt that locks into the receiver by tipping its rear part section into the recess in the receiver floor. The receiver is machined from a forged steel block. The trigger housing with pistol grip is hinged to the receiver assembly behind the magazine well and is hinged downward for maintenance and disassembly. The recoil spring is housed in the butt of the rifle. The folding cocking handle is located at the left side of the receiver and is stationary when the rifle is fired. The safety, fire selector switch is located on the trigger housing, above the triggerguard. The firing mechanism is hammer fired and has a single sear engagement for semi-automatic fire. The barrel is equipped with long flash hider which also serves as a rifle grenade launcher. There is a post front sight and a folding graduated peep rear sight. A folding carry handle with a green plastic grip is attached to the rear of the gas cylinder. A cast alloy butt plate with a trap is attached to the butt stock which has provision for an oil bottle and pull through rope. The rifle has a detachable 20 round magazine. The rifle has a blued and parkerised finish. Markings - Left side of the receiver engraved RIFLE 7.62 MM L1.A1. Lithgow proof marks; DP INOC.

Contextual Description

The L1A1 SLR was the standard rifle of the Australian Army from 1960 to 1992. The L1A1 is a local adoption of the British L1A1 SLR (a development of the Belgian FN FAL). It is a reliable weapon which has proved itself in all environmental conditions and is regarded as one of the most successful battle rifles ever produced.

Details

Accession Number
REL35170
Classification
Technology
Object Type
Firearm
Physical Description
Material: Plastic
Material: Steel
Measurement
Overall: 1136 mm x 60 mm x 250 mm
Date Made
1969
Place Made
Whole/Part
Whole
Item Count
1
Copyright
Copyright not applicable

Conflicts

Places

Units

Tags

Accession REL35170

More like this

L1A1 Self Loading Rifle

Technology REL/08078 Period 1970-1979

The L1A1 SLR (self loading rifle) is a gas operated, semi automatic, magazine fed battle rifle. The gas system is located above the barrel and operates on the short stroke piston principle. When a sho

L1A1 Sectionized Self Loading Rifle

Technology REL/10278 Period 1970-1979

The L1A1 SLR (self loading rifle) is a gas operated, semi automatic, magazine fed battle rifle. The gas system is located above the barrel and operates on the short stroke piston principle. When a sho

L1A1 Self Loading Rifle

Technology REL/19501.001 Vietnam, 1962-1975

L1A1 Self Loading Rifle. Hinged receiver with a pressed metal top cover in blued steel. Wooden butt, pistol grip and half length fore stock. Half exposed barrel with a flash suppressor muzzle and a ba

L1A1 HB Self Loading Rifle

Technology REL27301 Period 1970-1979

L1A1 HB Self Loading Rifle. Hinged receiver with a pressed metal top cover in blued steel. Wooden butt and pistol grip but no fore stock exposing the gas tube. It has a cylindrical blank fire device a

Steyr F88 Assault Rifle

Technology REL22186 Somalia, 1992-1995

The Steyr F88 is a gas operated, magazine fed, selective fire rifle using the bullpup stock configuration. The rifle is built around an aluminium receiver casting with steel reinforcement inserts. One

M16A1 Assault Rifle

Technology REL35274 Period 1970-1979

The M16A1 (AR15) is a gas operated, select fire, magazine fed rifle. The rifle functions using the direct gas system where the gases are fed from the barrel and down to a stainless steel tube into the

See more similar items →

Record information

Last modified: 12 October 2026 - 4.22 am