Ship's wheel : HMAS Bathurst I Accession Number: REL40913

Description

Wooden eight-spoked ship's wheel (helm) with central brass boss and a circular brass overlay on each side of the wheel by 23 brass screws. The boss is impressed 'AF (remains of broad arrow symbol) 1'.

Contextual Description

The Australian corvette HMAS Bathurst (I) was launched on 1 August 1940, the first of sixty minesweepers built in Australian dockyards during the Second World War. In her honour the ships where thereafter known as 'Bathurst' class. Commissioned in Sydney on 6 December under the command of Lieutenant Commander Andrew Veitch Bunyan, Royal Australian Naval Reserve (RANR), the 730 ton Bathurst began her career with the 21st Minesweeping Flotilla operating in waters around the east coast of Australia, Malaya and Singapore.

In early June 1941 the Bathurst joined the Royal Navy Eastern Fleet at the East Indies Station before transferring to the Red Sea Force based at Aden later that same month. The ship was tasked with patrolling the Gulf Of Tajura in French Somaliland, reinforcing the Allied blockade of the African Coast.

In October 1942, Bunyan was relieved by Lieutenant Commander Charles MacDonald, RANR. In December the Bathurst relocated to a new home port at Colombo, Ceylon and assumed escort and patrol duties in the Persian Gulf and Arabian Sea.

During MacDonald's command the Bathurst undertook constant anti-submarine patrols and convoy escort duties across the Arabian Sea. Refitted at Colombo in September 1943 Bathurst extended her escort duties to include troopships travelling from the Middle East to the South West Pacific theatres.

While in Bombay on 14 April 1944, the Bathurst assisted in rescue and salvage following an explosion on board the ammunition ships Fort Stikine and Jalapadma that devastated the dock area, resulting in over 1300 deaths and the loss of over 34,000 tons of shipping.

The Bathurst returned to Australia in September to patrol the waters around Australia and New Guinea. Following the surrender of the Japanese Bathurst, now under the command of Lieutenant Commander Kenneth Oswald Stewart, RANR, was sent to assist in the clearing of mines in the approaches to Hong Kong. Three years later the ship was sold for scrap and broken up.

Details

Accession Number
REL40913
Maker
Cockatoo Island Dockyard
Classification
Technology
Object Type
Maritime vessel or watercraft
Physical Description
Material: Brass
Material: Wood
Measurement
Overall: height 930 mm x width 930 mm x depth 125 mm
Date Made
c 1940
Place Made
Whole/Part
Whole
Item Count
1
Copyright
Copyright not applicable

Conflicts

Places

Units

More like this

Ship's bell : HMAS Sydney (I)

Heraldry RELAWM09977 First World War, 1914-1918

Brass bell with black incised letters 'HMAS SYDNEY'. Crown & Headstock is painted grey. Clapper attached. This is the ships bell from HMAS Sydney (I). Bells have several important uses in the world'

HMAS Brisbane : Engine Room : Astern Control Wheel

Technology REL32981.038 Gulf War, 1990-1991

The Astern Control wheel consists of a cast alloy five spoke wheel. It is attached to a threaded shaft. The shaft runs through a cylindrical cast section on which are mounted a brass indicator plate a

HMAS Brisbane : Engine Room : Ahead Control Wheel

Technology REL32981.037 Gulf War, 1990-1991

The Ahead Control Wheel consists of a cast alloy six spoke wheel. It is attached to a threaded shaft. The shaft runs through a cylindrical ribbed casting which is fitted with a brass indicator plate a

Ship's wheel from HIJMS 'Ibuki'

Technology RELAWM08238 Period 1920-1929

Circular wooden spoked wheel, with eight carved balustered spokes, reinforced around its front and rear circumferences with brass banding. There appear to be Japanese markings on this band. The centra

Autographed commissioning pennant : HMAS Maryborough

Heraldry REL31705 Second World War, 1939-1945

White wool bunting ship's swallow-tailed commissioning pennant with a red cross of St George. The white sections of the pennant bear signatures of members of the ship's company, written in ink and ind

Stern of HMAS Sydney (I)

Technology RELAWM09486 First World War, 1914-1918

Portion of the extreme stern of the light cruiser HMAS Sydney I, cut off the ship in 1928. The artifact is constructed of sheet steel plate, fastened to internal bulb frames with countersunk flush ri

See more similar items →

Record information

Last modified: 16 September 2026 - 3.28 am