Gas rattle : British Army Accession Number: REL/03912.001

Description

Rectangular hardwood box structure fitted with a rotating hexagonally shaped handle. A single nail has been hammered through the handle. This handle is secured to the opposite end via a metal axle. Above the handle the hardwood frame has been cut at an angle. Attached to this is a rectangular shaped piece of metal with four screws. An eight sided wooden cog ratchet is attached to the metal axle. This ratchet would normally touch upon a wooden tongue which no longer exists. The partial remains of the plywood tongue are secured internally by three screw bolts and two metal washers. A hardwood bar located immediately behind the end of the tongue is fitted to prevent excessive movement of the tongue. An eliptically shaped line follows this bar along the inside of both internal sides. The hardwood bar is secured to the box structure by a pair of dowel which have been hammered through the structure. The manufacturers stamping 'S A S' has been stamped into the rattle in several places including both external sides, on the end surface, underneath the rattle and on the base of the handle. On one external face is also stamped a Government Broad Arrow underneath which is the number 49 and the letter 'G'.

Contextual Description

During the First World War poisonous gases such as chlorine, phosgene and mustard gas were released silently from cylinders, or quietly discharged from exploding gas artillery shells. The loud and distinctively sharp clacking noise made by gas rattles stood out amongst the other sounds heard in the trenches and nearby soldiers would rush to put on their protective gas equipment, such as respirators and hoods.

After the First World War tens of thousands of these rattles (and civilian made copies) entered the civilian market with many of them being associated with English football (soccer) matches until the 1970's. Similar rattles to this were also used in Australia during the Second World War by civil defence organisations in the event of the use of gas by the Imperial Japanese on the civilian population.

This example is from the First World War and was likely made in the United Kingdom during the war after the introduction of gas warfare by the Germans on the Western Front in 1915. The manufacturers markings 'S A S' are stamped in five seperate locations along with a distinctive Government Broad Arrow and the numbers 49 over the letter 'G'. One variation on this particular gas rattle is the rectangular shaped piece of metal screwed onto the rattle above the handle. It appears to have been used to secure the metal axle which rotates the handle.

Details

Accession Number
REL/03912.001
Maker
Unknown
Classification
Heraldry
Object Type
Personal Equipment
Physical Description
Material: Metal
Material: Plywood
Material: Wood
Measurement
Overall: 232 mm x 292 mm x 60 mm
Date Made
c 1915-1918
Place Made
Whole/Part
Child
Item Count
1
Credit Line
This item has been digitised with funding provided by Commonwealth Government.
Copyright
Copyright not applicable

Conflicts

Units

Tags

More like this

Gas rattle : British Army

Heraldry REL/03912.002 First World War, 1914-1918

Rectangular hardwood box structure fitted with a rotating hexagonally shaped handle. A single nail has been hammered through the handle. This handle is secured to the opposite end via a metal axle.

Wooden Gas Rattle

Heraldry REL/01305 Second World War, 1939-1945

Wooden gas rattle fitted with non-original metal handle from a post Second World War car door. The side profile of the rattle is a half pear shaped figure. All large flat pieces of wood have been sa

Pair of gas rattles : British Army

Heraldry REL/03912 First World War, 1914-1918

Pair of First World War British made gas rattles. Both have the plywood tongue broken off. During the First World War poisonous gases such as chlorine and mustard gas were released silently from cy

French ARS gas respirator container

Heraldry RELAWM11134.002 First World War, 1914-1918

Circular shaped stamped sheet metal container for a French ARS type gas respirator with folding stamped sheet metal lid. The lid is attached to the container by a rectangular shaped hinge. Painted

Wooden rattle used by Air Raid Wardens

Technology REL/14094 Second World War, 1939-1945

Standard pattern wooden alarm rattle used by Air Raid and Civil Defence personnel and mainly manufactured from a dark brown hardwood timber which is nailed and screwed. The rear closing panel is the o

French ARS gas respirator

Heraldry RELAWM11134.001 First World War, 1914-1918

French ARS type gas mask fitted with a centrally mounted removable circular shaped filter unit. The entire respirator is finished in an overall khaki brown colour. Stamped in black ink on the left c

See more similar items →

Record information

Last modified: 20 November 2026 - 3.56 am