Damaged Helmet, Steel, Mark I : Private W C Harding, 18 Battalion, AIF Accession Number: RELAWM01013

Description

British Mark 1 Brodie pattern steel helmet. There are two shrapnel or bullet entry holes in the rear of the helmet. The helmet is well worn and dirty, it has minor areas that have been polished from use, and other areas that have loose paint. There are minor areas of blue paint to the external surface

There is a leather chin strap with copper and iron alloy fittings, which is size adjustment via a buckle. The strap is threaded through D hooks in each side of the helmet and through D hooks in the helmet padding/cage, it then passes under the cage and is fixed to the center of the crown with a rivet.

The padded cage inside the helmet is constructed of layers starting at the inside: internal surface of back rubberised fabric, open weave cotton, stiff hessian, short pieces of rubber tubing and then a brown rubber coated cotton fabric. A cotton net and piece of brown felt is secured to the upper outer section of the cage, the net is drawn with a piece of cotton string loosely knotted at the back. Most of the layers are machine stitched together with cotton thread.

Inside the crown of the helmet is a piece of firm board like chrysotile asbestos which is sandwiched with open weave cotton ,and two layers of felt . This sandwich is secured around the edges with machine stitching, which does not penetrate the asbestos. This sandwich is held in place with the same rivet that hold the leather strap and a small piece of paper. The asbestos sandwich its next to the steel helmet, the leather strap is on top and the piece of paper is last.

Contextual Description

Steel helmet worn by 6423 Private William Charles Harding. Harding was wearing this helmet when he advanced behind a machine-gun barrage with the 18th Battalion towards a section of the Beauvoir Line, between Tincourt and Estrees, on 3 October 1918. A bullet penetrated the helmet but did not knock it off his head. Beyond momentary shock, he experienced no ill effects.

Harding was born in Lucknow, near Orange in New South Wales. He was 22 years of age when he enlisted on 28 July 1916. On 11 November 1916, he embarked from Sydney per Suevi, before proceeding overseas to France on 3 May 1917. He served in France until his return to Australia per Miltiades on 19 June 1919.

The Brodie helmet, called Helmet, Steel, Mark I in Britain and the M1917 Helmet in the U.S., is a steel combat helmet designed and patented in 1915 by Englishman John Leopold Brodie. The original design, a version of the "War Office Pattern Helmet", was made of mild steel. The dome of the helmet was a little narrower and slightly flattened on top than the later versions. The main difference, however, was the brim. It was wider and more sloping, measuring approximately 40mm at the front and rear and 50mm at each side. The helmet measured 295mm from side to side and 317mm from front to rear. The second version, the "1st Pattern Brodie Helmet" had a more pronounced dome with steeper sides, giving it a more rounded appearance. The brim was considerable smaller than the original design and the helmet shells appear to have not been manufactured uniformly.

The original paint scheme was a mottled light green, blue, and orange camouflage, however they were also painted inside and out in colours varying from a bright apple green to a dull blue-grey. By February 1916, the predominant colour used was a dull green. Many helmets were re-painted during the First World War because the early paint finishes were found to be reflective.

The Brodie helmet reduced casualties, however during the testing at the beginning of March 1916 in battle, a number of problems were identified:
- The helmet was too round and shallow, which meant that it was difficult to keep in place, despite the chinstrap.
- The liner was hot and slippery.
- The edge of the helmet was sharp, causing injury.
- The paint finish was shiny and reflected light.
- The helmet was made in only one size. Suggestion was given to manufacture it in three sizes.

The Mark 1 model helmet of 1916 had a separate folded rim, a two-part liner and matte khaki paint finished with sand, sawdust, or crushed cork to give a dull, non-reflective appearance. In 1917, the liner was modified to include a rubber cushion to make it more comfortable, although this was not adopted for the M1917.

Details

Accession Number
RELAWM01013
Maker
Unknown
Classification
Heraldry
Object Type
Helmet
Physical Description
Material: Steel
Measurement
Overall: 130 mm x 295 mm x 315 mm
Date Made
Unknown
Place Made
Whole/Part
Whole
Item Count
1
Copyright
Copyright not applicable

Conflicts

Places

Events

Tags

More like this

German Model 1916 steel helmet

Heraldry REL/00992 First World War, 1914-1918

German Army Model 1916 steel helmet painted in fieldgrey (grey-green) and complete with a pair of ventilation lugs, chinstrap attachment rivets, brown leather headband and a three-piece, two-tongue li

German Model 1916 steel helmet : Broodseinde Ridge, Belgium

Heraldry REL/00990.001 First World War, 1914-1918

German Army Model 1916 steel helmet painted in fieldgrey (grey-green) and complete with brown leather headband and a three-piece, two-tongue liner with a leather drawstring. There are fabric pockets f

British pattern steel helmet

Heraldry REL30326 Second World War, 1939-1945

Khaki painted British pattern steel helmet. The inside of the helmet is padded with foam rubber and has an adjustable cotton chin strap. The chin strap is marked with the name 'D SELLARS' and an illeg

German Model 1918 cut out steel helmet

Heraldry REL23287 First World War, 1914-1918

German Model 1918 steel helmet with leather liner and chinstrap. The helmet has cut-out ear sections in the brim to assist hearing. The exterior and interior are painted in an overall grey green colou

Steel helmet : 168th Infantry Regiment, US Army

Heraldry REL42672 First World War, 1914-1918

American Model 1917 steel helmet painted matte khaki throughout, with sawdust added to the exterior finish to provide a non-reflective surface. The width of the brim, which is fitted with a steel rim,

See more similar items →

Record information

Last modified: 2 October 2025 - 4.00 am