The Australian War Memorial Collection. Test site
A 4 inch calibre high explosive naval projectile. The projectile has a 38 mm wide brass plated driving band located 18 mm above the base. The case is hollow and empty and there is no nose tip fuze fitted in the 62 mm diameter case mouth. The projectile is painted yellow with a 13 mm wide red band painted 26 mm below the case mouth, and a 13 mm green band over a 135 mm black band at the base of the conical nose profile.
Unknown
A 4 inch calibre high explosive naval projectile. The projectile has a 37 mm wide brass driving band located 61 mm above the base. The case is hollow and empty and there is no nose tip fuze fitted in
A 4 inch calibre high explosive Mark N2 naval projectile. The projectile has a 38 mm wide brass driving band located 62 mm above the base. The case is hollow and empty and there is no nose tip fuze fi
A 6 inch calibre Mark 1D artillery projectile (empty) to hold 100 pound weight of high explosive. This projectile is 603 mm long and 149 mm diameter and has a tapered nose. The projectile is painted y
Fired 77 mm artillery projectile, complete with nose fuze. The steel projectile case is designed to hold explosive (now empty). The item (including fuze) is 290 mm long, the bottom 190 mm is painted y
A 105 mm M314A2 illuminating projectile for use in 105 mm howitzers (such as the M101, and Light Gun, used in Australian army service). The projectile is 475 mm long and has a diameter of 105 mm. It i
A 3 inch calibre, Mark II T, high explosive, projectile as used in the 20 hundredweight anti-aircraft gun that was in service (with various modifications ) from 1914 to 1945. The projectile is 270 mm