Water bottle carrier : Victorian Navy Accession Number: REL26333.007

Description

Brown vegetable-tanned leather water bottle carrier of unidentified pattern but associated with the Victorian Navy. The water bottle this carrier was designed for would have been 6 1/2 inches in height with a circumference of 12 1/2 inches. The carrier is made from three pieces of leather: a stiff leather band which runs around the circumference of the bottle; a strap which runs underneath and over the top of the bottle; and a belt loop to secure the carrier to a waist belt. The band measures 2 inches in width and has been formed into a circle with overlapped ends secured with five copper rivets and stitching. The strap which measures 22 inches in length and 7/8 inches wide has been secured at one end into the seam of the band underneath one of the rivets. The strap passes towards the base of the bottle and has two right-angle turns as it runs underneath the bottle and up the other side before being secured between the band and the belt loop on the other side of the band with rivets and stitching. The strap continues towards the top of the bottle where there is a right-angle turn before the strap widens to 1 3/8 inches with a shaped cut in the leather to accommodate the top of the bottle. There is another right-angle fold before the strap is secured to a brass stud which has been stitched into the band of the carrier. A 2-inch-wide belt loop is stitched and secured with five rivets to the band. The loop is large enough to accommodate a belt up to 2 1/2 inches in width. The edges of all pieces of leather have an incised (tooled) decorative line along their edges. On the band a mark has been stamped and impressed into the leather. Within a circle the words 'VICTORIA NAVY' appear. Below the circle the number '165' has been stamped.

Contextual Description

The use of rivets in addition to stitiching suggests a date of manufacture after June 1888 when the List of Changes 5540 notes that rivets were to be substituted for sewing as far as practicable for naval accoutrements 'as the threads have been found liable to deterioration'. After December 1888, a new enamelled water bottle was introduced for both land and sea service. However this bottle was not cylinderical in shape and could not have fitted into this type of carrier.

Details

Accession Number
REL26333.007
Maker
Unknown
Classification
Heraldry
Object Type
Personal Equipment
Physical Description
Material: Brass
Material: Copper
Material: Vegetable-tanned leather
Measurement
Overall: 165 mm x 120 mm x 120 mm
Date Made
c 1890
Place Made
Whole/Part
Whole
Item Count
1
Copyright
Copyright not applicable

Conflicts

Places

Units

Tags

Accession REL26333.007

More like this

Water bottle : Victorian Mounted Rifles

Heraldry REL42201 Australian Colonial Forces, 1854-1900

Oval aluminium German pattern water bottle with cork stopper capped with aluminium and a ring fitting. The body of the bottle is covered with khaki felt, which closes over each shoulder with three bla

1901 Pattern Naval bayonet frog : Victorian Naval Reserve

Heraldry REL26333.006 Australian Colonial Forces, 1854-1900

Brown vegetable-tanned leather 1901 Pattern naval bayonet frog (described in List of Changes 11110 8 August 1901 and 28 February 1902). The frog is made from three pieces of leather: the loop which pa

Ammunition pouch : British and colonial forces

Heraldry REL27602.003 Australian Colonial Forces, 1854-1900

Brown vegetable-tanned leather ammunition pouch based on an 1870 pattern designed to carry 20 rounds of ammunition in two packets. The pouch is made from five pieces of leather: front flap and back, f

See more similar items →

Record information

Last modified: 11 November 2026 - 4.55 am