302072
Photograph 302072 Period 1960-1969SYDNEY, NSW. 1967-10-03. BOW VIEW OF THE COASTAL MINESWEEPERS HMAS HAWK II (M1139) AND GULL (M1185) ALONGSIDE. NEITHER SHIP HAS ITS FORWARD 40 MM BOFORS GUN MOUNTED. NOTE THE DIFFERENT STYLES IN WHICH

The Australian War Memorial Collection. Test site
Partly varnished solid teak board with reflective chrome plated letters spelling the word 'HAWK' mounted on the front. The side surfaces of each letter are painted red. The board is made from two pieces of teak, with each corner being scalloped. The rear surface of the board is not varnished and has a pair of metal mounting brackets attached by a single piece of brown packing tape. Each of these mounting brackets has a pair of mounting holes which correspond with holes bored into the rear side of the board. There are remnants of white tape adhering to the rear side of the board. Several holes with the mounting screws for the letters are also visible.
The HMAS Hawk (hull number M-1139) was a Ton class minesweeper built as HMS Gamston for the Royal Navy by Richards Ironworks at Lowestoft in England. HMAS Hawk was purchased by Australia in 1961 and commissioned into the RAN on 18 July 1962. As part of the 16th Minesweeping Squadron, HMAS Hawk served three Operational rotations in Malaysian waters, from 6 May to 18 September 1964, 7 January to 14 August 1965 and 10 January to 14 September 1966. During these rotations, the ship saw service in waters around both West Malaysia and Borneo against Indonesian infiltrators. The HMAS Hawk was paid off on 7 January 1972.
Length of angle (610mm) aluminium with remnants of blue and green paint. There are eleven 10 mm holes drilled through one face at 40 mm apart and 2 x 10 mm holes drilled through the other face. The

The engine room gauge board is a large alloy panel, rectangular in shape, with various gauges and pieces of equipment attached. Many of the gauges have been removed - the upper half of the board has b

Pair of Royal Australian Navy blue cotton trousers. The trousers have blue plastic buttons and a zippered fly closure. The knees are reinforced with a second layer of fabric, pleated to allow easier b

Grey painted plywood tally board from HMAS Kanimbla attached at the top, by five bolts, to a grey painted steel 'U' channel. Each end of the channel has been drilled through with a single hole to take

The engine room gauge board is a large alloy panel, rectangular in shape, with various gauges and pieces of equipment attached. Originally it had two rows of gauges although many have been removed - i

Handmade wooden cribbage board roughly cut from a length of timber planking. The upper and lower sides bear the remains of a coat of lime wash. The upper side only has traditionally grouped sets of pe
