HMAS Brisbane : Engine Room : Alarm Panel and Horn Accession Number: REL32981.036

Description

Alarm Panel and horn. The panel consists of is a grey rectangular metal case. At the back are two welded brackets drilled with three bolt holes. At the bottom are two cable fittings, the cover is retained by six screws. At the top is a nomenclature plate that reads: `Alarm Panel ' 4 circuit Type B-52, 115 volts, AC-DC, Wing Corporation.' Below the plate is a clear indicator light. The lower half of the front panel is divided into two sections. The left section has a plate that reads: `LOW LUBE OIL ALARM,' with two metal switches underneath it, while the section on the right reads: `LOW ACC ALARM', and also has two metal switches. Emerging from the base of the unit are four power cables. One of the cables is connected to a horn, type 167 H1S4. The horn is a grey circular unit with a large brass cylindrical horn piece. The unit is made by Federal Sign and Signal Corporation, Blue Island, Illinois, USA. The horn has three holes in the back to secure it to the wall.

Contextual Description

This component was removed from HMAS Brisbane after the ship was de-commissioned in 2001. The Panel and Horn were in the ship's Engine Room, both are part of Gauge Board REL32981.002. HMAS Brisbane [II] was commissioned into the Royal Australian Navy in December 1967 and was the second vessel of that name to serve in the RAN. Known officially as DDG-41, Brisbane was the third of the RAN's American-built "Charles F. Adams" class guided-missiles destroyers. This class were the first major Australian warships designed and built in America, and were constructed by the Defoe Shipbuilding Co. The original complement of the Brisbane was 20 officers and over 300 sailors. Main armament was two 5-inch/54 calibre guns and anti-submarine torpedoes. The Ikara missile system was subsequently added. In later service the ship was known by the nick-name ‘the Steel Cat’. The HMAS Brisbane saw operational service in two conflicts. During the Vietnam War the ship undertook two tours of duty with the United States Seventh Fleet, in 1969 and again in 1971. The ship’s major task was to provide gunfire support for the land campaign. During the Gulf War (1990-91), Brisbane was one of four Australian warships to serve a tour in Gulf waters. The Brisbane arrived in the Gulf in December 1990 and operated there until March 1991, performing a number of roles. Apart from contributing to the anti-aircraft defences in the carrier screen, the ship also kept watch for mines and ensured that small civilian craft kept well away from the carrier group. Later, during Operation Desert Storm, the Brisbane controlled fighter combat air patrols and tanker aircraft. The ship’s final role was as an escort for US replenishment ships. In 2003 HMAS Brisbane was retired from service in the Royal Australian Navy. The Brisbane was the last steam powered ship in the RAN. HMAS Brisbane was sunk as a recreational dive wreck off the coast of southern Queensland in July 2005.

Details

Accession Number
REL32981.036
Maker
Federal Sign and Signal Corporation
Maker
Wing Corporation
Classification
Technology
Object Type
Maritime vessel or watercraft
Measurement
Overall: 27 x 17.5 x 14.5 cm
Date Made
Unknown
Place Made
Whole/Part
Whole
Item Count
1
Copyright
Copyright not applicable

Conflicts

Units

Tags

Accession REL32981.036

More like this

HMAS Brisbane : Bus Failure Alarm Signal Unit

Technology REL33054 Gulf War, 1990-1991

The bus failure alarm signal unit consists of a rectangular metal front, painted grey, although the case is missing. The front panel has a speaker section at the top, in the middle there is (from left

HMAS Brisbane : Engine Room : Gauge Board

Technology REL32981.002 Gulf War, 1990-1991

The engine room gauge board is a large alloy panel, rectangular in shape, with various gauges and pieces of equipment attached. Many of the gauges have been removed - the upper half of the board has b

HMAS Brisbane : Bus Failure Alarm Signal Unit

Technology REL33055 Gulf War, 1990-1991

The bus failure alarm signal unit consists of a rectangular metal front, painted grey, although the case is missing. The front panel has a speaker section at the top, in the middle there is (from left

HMAS Brisbane : Engine Room : Alarm Bell (x2)

Technology REL32981.005 Gulf War, 1990-1991

Two bell fronts. The bell fronts are made of brass and are circular in shape. There is a single hole in the centre of the unit. On the underside of the bells are the names of many of the crew and vari

HMAS Brisbane : Engine Room : Engine gauge

Technology REL32981.018 Gulf War, 1990-1991

The gauge is circular, with a machined alloy body and a grey front rim. The face of the gauge is white, protected by an acrylic Perspex disc and is calibrated from 0-30 PSIG. There is a red line at 12

HMAS Brisbane : Gun Plot Room : Cover panel

Technology REL32980.103 Gulf War, 1990-1991

The cover panel is a large grey sheet of flat metal. One side of the panel has a slightly curved lip. There are several drill holes around the edges of the panel and several in the middle in no partic

See more similar items →

Record information

Last modified: 1 May 2023 - 2.28 am