'Hypo' helmet respirator : British Army Accession Number: REL31826

Description

'Hypo' or 'Smoke' helmet respirator as issued to British Army troops in summer 1915. The helmet is a simple bag made of unlined grey woollen flannel fabric, widening at the bottom where it reaches the wearer's shoulders. The single rectangular window, apparently made of cellulose acetate, is machine sewn into the front of the helmet using a strip of white cotton tape to reinforce the join. The front and rear sections of the helmet are joined by a seam which runs around the perimeter, and there is a horizontal seam located two thirds of the way down the back.

Contextual Description

Introduced into British Army service in May 1915, the 'Hypo' or 'Smoke' helmet was intended to replace the stop-gap 'veil' respirators which had been rushed into production after the first German chlorine gas attack at Ypres in April. The new helmet was made of grey woollen Viyella or flannel fabric. It was soaked in a solution of sodium hyposulphite, (from which the name 'Hypo' was adopted) bicarbonate of soda, and glycerine, which served to keep the chemicals moist. Initially fitted with a window made of Mica, which was extremely brittle and prone to damage, later examples had windows made of celluloid, or cellulose acetate. By 6 June 1915, all British soldiers on the Western Front had been issued with a 'Hypo' helmet, but they did not prove popular in service. The troops disliked the complicated procedure for fitting (it was designed to be tucked inside the shirt and held in place by the tunic) and found it very hot and stuffy to wear. There was no valve for the intake or expiration of air, so that exhaled carbon dioxide tended to accumulate in the many folds and hollows of the fabric. It was also extremely difficult to aim a weapon while wearing it. It nevertheless represented a major improvement on the primitive 'black veil' respirator, and the 'P', 'PH' and 'PHG' helmets which succeeded the 'Hypo' later in 1915 and 1916 all followed the same basic design. Australian and New Zealand troops serving in the Anzac area were issued with 'Hypo' helmets in late 1915, in anticipation of a Turkish use of gas which did not eventuate.

Details

Accession Number
REL31826
Maker
Unknown
Classification
Heraldry
Object Type
Personal Equipment
Physical Description
Material: Acetate
Material: Cotton tape
Material: Wool flannel
Measurement
Overall: 508 mm Height x 490 mm Width x 12 mm Depth
Date Made
c 1915
Place Made
Whole/Part
Whole
Item Count
1
Copyright
Copyright not applicable

Conflicts

Places

Events

Units

Tags

Accession REL31826

More like this

'Hypo' helmet respirator : British Army

Heraldry REL/03924 First World War, 1914-1918

Single layered grey flannel hood which consists of two pieces of flannel machine sewn together. The front half has a rectangular shaped viewing aperture made from a now heavily cracked and broken pie

PH Helmet respirator : British Army

Heraldry RELAWM04043.001 First World War, 1914-1918

'PH' or 'Tube' helmet respirator as issued to British Army troops from January 1916. The helmet is a simple bag made from a double thickness of unlined blue-grey woollen flannelette fabric with a side

Black Veil respirator : British Army

Heraldry REL31825.002 First World War, 1914-1918

British Army 'Black Veil' respirator. The mask is made from a 1 metre length of 280 mm wide black veiling. The veiling is folded to form a 100 mm wide sleeve, the centre of which is sewn to form a 200

Satchel for Black Veil respirator : British Army

Heraldry REL31825.001 First World War, 1914-1918

Satchel to hold the British Army 'Black Veil' respirator. The satchel is made from rubberised khaki cotton drill fabric, and has an overlapping front flap with a pair of cotton tape ties. The ties are

M2 respirator satchel : French Army

Heraldry REL31834.001 First World War, 1914-1918

Satchel for the French Army M-2 Respirator. The semicircular satchel is made from a double thickness of pale khaki cotton fabric, the inner surfaces of which are coated with brown rubber waterproofing

See more similar items →

Record information

Last modified: 1 May 2023 - 2.36 am